While reprozip is responsible for tracing and packing an experiment, reprounzip is the component used for the unpacking step. reprounzip is distributed with three unpackers for Linux (reprounzip directory, reprounzip chroot, and reprounzip installpkgs), but more unpackers are supported by installing additional plugins; some of these plugins are compatible with different environments as well (e.g.: reprounzip-vagrant and reprounzip-docker).
Inspecting a Package¶
Showing Package Information¶
Before unpacking an experiment, it is often useful to have further information with respect to its package. The
reprounzip info command allows users to do so:
$ reprounzip info <package>
where <package> corresponds to the experiment package (i.e.: the
.rpz file). You can use
-v for verbose to get more detailed information on the package.
The output of this command has three sections. The first section, Pack Information, contains general information about the experiment package, including size and total number of files:
----- Pack information ----- Compressed size: <compressed-size> Unpacked size: <unpacked-size> Total packed paths: <number>
The next section, Metadata, contains information about dependencies (i.e., software packages), machine architecture from the packing environment, and experiment execution:
----- Metadata ----- Total software packages: <total-number-software-packages> Packed software packages: <number-packed-software-packages> Architecture: <original-architecture> (current: <current-architecture>) Distribution: <original-operating-system> (current: <current-operating-system>) Executions: <command-line> wd: <working-directory> exitcode: 0
Note that, for Architecture and Distribution, the command shows information with respect to both the original environment (i.e., the environment where the experiment was packed) and the current one (i.e., the environment where the experiment is to be unpacked). This helps users understand the differences between the environments in order to provide a better guidance in choosing the most appropriate unpacker.
Last, the section Unpackers shows which of the installed reprounzip unpackers can be successfully used in the current environment:
----- Unpackers ----- Compatible: ... Incompatible: ... Unknown: ...
Compatible lists the unpackers that can be used in the current environment, while Incompatible lists the unpackers that are not supported in the current environment. An additional Unknown list shows the installed unpackers that might not work.
As an example, for an experiment originally packed on Ubuntu and a user reproducing it on Windows, the vagrant unpacker (available through the reprounzip-vagrant plugin) is compatible, but installpkgs is not; vagrant may also be listed under Unknown if the vagrant command is not found in PATH (e.g.: if Vagrant is not installed).
Showing Input and Output Files¶
reprounzip showfiles command can be used to list the input and output files defined for the experiment. These files are identified by an id, which is either chosen by ReproZip or set in the configuration file before creating the
$ reprounzip showfiles package.rpz Input files: program_config ipython_config input_data Output files: rendered_image logfile
Using the flag
-v shows the complete path of each of these files in the experiment environment.
This command is particularly useful if you want to replace an input file with your own, or to get and save an output file for further examination. Please refer to Managing Input and Output Files for more information.
Creating a Provenance Graph¶
ReproZip also allows users to generate a provenance graph related to the experiment execution. This graph shows the relationships between files, library dependencies, and binaries during the execution. To generate such a graph, the
reprounzip graph command should be used:
$ reprounzip graph package.rpz graph-file.dot $ dot -Tpng graph-file.dot -o image.png
where graph-file.dot corresponds to the graph, outputted in the DOT language.
If you are using a Python version older than 2.7.3, this feature will not be available due to Python bug 13676 related to sqlite3.
From the same
.rpz package, reprounzip allows users to set up the experiment for reproduction in several ways by the use of different unpackers. Unpackers are plugins that have general interface and commands, but that can also provide their own command-line syntax and options. Thanks to the decoupling between packing and unpacking steps,
.rpz files from older versions of ReproZip can be used with new unpackers.
The reprounzip tool comes with three unpackers that are only compatible with Linux (
reprounzip chroot, and
reprounzip installpkgs). Additional unpackers, such as
reprounzip vagrant and
reprounzip docker, can be installed separately. Next, each unpacker is described in more details; for more information on how to use an unpacker, please refer to Using an Unpacker.
The directory Unpacker: Unpacking as a Plain Directory¶
The directory unpacker (
reprounzip directory) allows users to unpack the entire experiment (including library dependencies) in a single directory, and to reproduce the experiment directly from that directory. It does so by automatically setting up environment variables (e.g.: PATH, HOME, and LD_LIBRARY_PATH) that point the experiment execution to the created directory, which has the same structure as in the packing environment.
Please note that, although this unpacker is easy to use and does not require any privilege on the reproducing machine, it is unreliable since the directory is not isolated in any way from the remainder of the system. In particular, should the experiment use absolute paths, they will hit the host system instead. However, if the system has all the required packages (see The installpkgs Unpacker: Installing Software Packages), and the experiment’s files are addressed with relative paths, the use of this unpacker should not cause any problems.
reprounzip directory provides no isolation of the filesystem, as mentioned before. If the experiment uses absolute paths, either provided by you or hardcoded in the experiment, they will point outside the unpacked directory. Please be careful to use relative paths in the configuration and command line if you want this unpacker to work with your experiment. Other unpackers are more reliable in this regard.
reprounzip directory is automatically distributed with reprounzip.
The chroot Unpacker: Providing Isolation with the chroot Mechanism¶
In the chroot unpacker (
reprounzip chroot), similar to
reprounzip directory, a directory is created from the experiment package; however, a full system environment is also built, which can then be run with
chroot(2), a Linux mechanism that changes the root directory
/ for the experiment to the experiment directory. Therefore, this unpacker addresses the limitation of the directory unpacker and does not fail in the presence of hardcoded absolute paths. Note as well that it does not interfere with the current environment since the experiment is isolated in that single directory.
Do not try to delete the experiment directory manually; always use
reprounzip chroot destroy. If
/dev is mounted inside, you will also delete your system’s device pseudo-files (these can be restored by rebooting or running the
Although chroot offers pretty good isolation, it is not considered completely safe: it is possible for processes owned by root to “escape” to the outer system. We recommend not running untrusted programs with this plugin.
reprounzip chroot is automatically distributed with reprounzip.
The installpkgs Unpacker: Installing Software Packages¶
By default, ReproZip identifies if the current environment already has the required software packages for the experiment, then using the installed ones for reproduction. For the non-installed software packages, it uses the dependencies packed in the original environment and extracted under the experiment directory.
Users may also let ReproZip try and install all the dependencies of the experiment on their machine by using the installpkgs unpacker (
reprounzip installpkgs). This unpacker currently works for Debian and Debian-based operating systems only (e.g.: Ubuntu), and uses the dpkg package manager to automatically install all the required software packages directly on the current machine, thus interfering with your environment.
To install the required dependencies, the following command should be used:
$ reprounzip installpkgs <package>
Users may use flag y or assume-yes to automatically confirm all the questions from the package manager; flag missing to install only the software packages that were not originally included in the experiment package (i.e.: software packages excluded in the configuration file); and flag summary to simply provide a summary of which software packages are installed or not in the current environment without installing any dependency.
Note that the package manager may not install the same software version as required for running the experiment, and if the versions are incompatible, the reproduction may fail.
This unpacker is only used to install software packages. Users still need to use either
reprounzip directory or
reprounzip chroot to extract the experiment and execute it.
reprounzip installpkgs is automatically distributed with reprounzip.
The vagrant Unpacker: Building a Virtual Machine¶
The vagrant unpacker (
reprounzip vagrant) allows an experiment to be unpacked and reproduced using a virtual machine created through Vagrant. Therefore, the experiment can be reproduced in any environment supported by this tool, i.e., Linux, Mac OS X, and Windows. Note that the plugin assumes that Vagrant is installed in the current environment.
In addition to the commands listed in Using an Unpacker, you can use
suspend to save the virtual machine state to disk, and
setup/start to restart a previously-created machine:
$ reprounzip vagrant suspend <path> $ reprounzip vagrant setup/start <path>
This unpacker is not distributed with reprounzip; it is a separate package that should be installed before using (see reprounzip-vagrant plugin).
The docker Unpacker: Building a Docker Container¶
ReproZip can also extract and reproduce experiments as Docker containers. The docker unpacker (
reprounzip docker) is responsible for such integration and it assumes that Docker is already installed in the current environment.
This unpacker is not distributed with reprounzip; it is a separate package that should be installed before using (see reprounzip-docker plugin).
Using an Unpacker¶
Once you have chosen (and installed) an unpacker for your machine, you can use it to setup and run a packaged experiment. An unpacker creates an experiment directory in which the working files are placed; these can be either the full filesystem (for directory or chroot unpackers) or other content (e.g.: a handle on a virtual machine for the vagrant unpacker); for the chroot unpacker, it might have mount points. To make sure that you free all resources and that you do not damage your environment, you should always use the destroy command to delete the experiment directory, not just merely delete it manually. See more information about this command below.
All the following commands need to state which unpacker is being used (i.e.,
reprounzip directory for the directory unpacker,
reprounzip chroot for the chroot unpacker,
reprounzip vagrant for the vagrant unpacker, and
reprounzip docker for the docker unpacker). For the purpose of this documentation, we will use the vagrant unpacker; to use a different one, just replace
vagrant in the following with the unpacker of your interest.
Setting Up an Experiment Directory¶
To create the directory where the execution will take place, the
setup command should be used:
$ reprounzip vagrant setup <package> <path>
where <path> is the directory where the experiment will be unpacked, i.e., the experiment directory.
Note that, once this is done, you should only remove <path> with the destroy command described below: deleting this directory manually might leave files behind, or even damage your system through bound filesystems.
The other unpacker commands take the <path> argument; they do not need the original package for the reproduction.
Most unpackers assume an Internet connection for the
setup command and will be downloading required software from the Internet. Make sure that you have an Internet connection, and that there is no firewall blocking the access.
Reproducing the Experiment¶
After creating the directory, the experiment can be reproduced by issuing the
$ reprounzip vagrant run <path>
which will execute the entire experiment inside the experiment directory. Users may also change the command line of the experiment by using
$ reprounzip vagrant run <path> --cmdline <new-command-line>
where <new-command-line> is the modified command line. This is particularly useful to reproduce and test the experiment under different input parameter values. Using
--cmdline without an argument only prints the original command line.
If the experiment involves running a GUI tool, the graphical interface can be enable by using
$ reprounzip vagrant run <path> --enable-x11
which will forward the X connection from the experiment to the X server running on your machine. In this case, make sure you have a running X server.
Removing the Experiment Directory¶
destroy command will unmount mounted paths, destroy virtual machines, free container images, and delete the experiment directory:
$ reprounzip vagrant destroy <path>
Make sure you always use this command instead of simply deleting the directory manually.
Managing Input and Output Files¶
When tracing an experiment, ReproZip tries to identify which are the input and output files of the experiment. This can also be adjusted in the configuration file before packing. If the unpacked experiment has such files, ReproZip provides some commands to manipulate them.
First, you can list these files using the
$ reprounzip showfiles <path> Input files: program_config ipython_config input_data Output files: rendered_image logfile
To replace an input file with your own, reprounzip, you can use the
$ reprounzip vagrant upload <path> <input-path>:<input-id>
where <input-path> is the new file’s path and <input-id> is the input file to be replaced (from
showfiles). This command overwrites the original path in the environment with the file you provided from your system. To restore the original input file, the same command, but in the following format, should be used:
$ reprounzip vagrant upload <path> :<input-id>
showfiles command shows what the input files are currently set to:
$ reprounzip showfiles <path> Input files: program_config (original) ipython_config C:\Users\Remi\Documents\ipython-config ...
In this example, the input program_config has not been changed (the one bundled in the
.rpz file will be used), while the input ipython_config has been replaced.
After running the experiment, all the generated output files will be located under the experiment directory. To copy an output file from this directory to another desired location, use the
$ reprounzip vagrant download <path> <output-id>:<output-path>
where <output-id> is the output file to be copied (from
showfiles) and <output-path> is the desired destination of the file. If no destination is specified, the file will be printed to stdout:
$ reprounzip vagrant download <path> <output-id>:
Note that the
upload command takes the file id on the right side of the colon (meaning that the path is the origin, and the id is the destination), while the
download command takes it on the left side (meaning that the id is the origin, and the path is the destination).
Reproducing Multiple Execution Paths¶
The reprozip component can only guarantee that reprounzip will successfully reproduce the same execution path that the original experiment followed. There is no guarantee that the experiment won’t need a different set of files if you use a different configuration; if some of these files were not packed into the
.rpz package, the reproduction may fail.